This is the Radio Frequency Receiver Module, which can facilitate the designers to design their remote control applications in the quickest way. The circuit is designed with SMD components and the module size is small enough to fit in to any application. This Receiver Module is Super-Regenerative (SR) Version without Decoder using Amplitude Modulation (AM) or in other words ON-OFF Keyed Modulation (OOK)

• PIN 1: GROUND
• PIN 2: DATA OUT
  
• PIN 3: RSSI
• PIN 4: VCC (5V DC)
• PIN 5: VCC (5V DC)
• PIN 6: GROUND
• PIN 7: GROUND
• PIN 8: ANTENNA (About 30 to 35 cm)

Specifications of RX1

• Complete RF Transmitter Module operating at 433.92 MHz.
• No external components and no tuning required.
• High Performance SAW Based Architecture with a Maximum Range of 100 feet at 2400 bps data rate.
• Interface directly to Encoders and Microcontrollers with ease.
• Low Power Consumption suitable for battery operated devices.
• 4 Pin Compact size modules
• Can be directly used in your PCB
• Straight Pin out is the standard in these modules
• Right angle Pin out is optional

• PIN 1: RF OUT
• PIN 2: DATA IN
  
• PIN 3: GROUND
• PIN 4: VCC

Specifications of RX1